Mold May Be Present in Flood-Damaged Ohio Homes

Ohio homes that were affected by the severe winter storms and flooding that began Dec. 22, could be harboring mold.

“Mold is a significant problem after flooding and proper cleanup is critical to ensure it doesn’t affect you or your family’s health,” said Lee Champagne, Federal Emergency Management Agency (FEMA) federal coordinating officer for the disaster. “Care must be taken to clean and completely dry areas of the home soaked by floodwaters to prevent structural damage and adverse health effects from mold.”

“Recovering from a flood can be a long and strenuous process,” said Ohio Emergency Management Agency Executive Director Nancy Dragani. “Residents and businesses in flooded areas should take the necessary steps to help protect themselves and their families from long term effects of flooding.”

Mold and health concerns

Mold growth is a common occurrence in flood-damaged homes and damp environments. Severe temperature changes such as freezing weather will not stop mold from growing. Mold could become a problem in your home if there is enough moisture available to allow mold to thrive and multiply. Dampness in basements, walls, carpets and wood provides an environment for mold to flourish.

Mold is made up of simple microscopic organisms that are found virtually everywhere. It can often be seen in the form of discoloration, ranging from white to orange and from green to brown and black, and gives off a musty or earthy smell.

Exposure to mold can cause health problems. Infants, children, immune-compromised patients, pregnant women, individuals with existing respiratory conditions, (allergies, chemical sensitivity, and asthma) and the elderly appear to be at higher risks for adverse health effects from mold.

Health symptoms known to be associated with exposure to mold include nose and throat irritation, wheeze, cough, asthma attacks in individuals who have asthma, and lower respiratory tract infections (in children). People with pre-existing respiratory conditions may also be susceptible to more serious lung infections.

Mold prevention tips

There is no practical way for you to eliminate all of the molds and mold spores in the indoor environment. But there are many ways to help control moisture and mold growth in your home. The basic rule is, if you can see or smell mold, take steps to eliminate the excess moisture, and to cleanup and remove the mold. It is important to quickly identify and correct any moisture sources before health problems develop.

Stop the water

* Fix leaks in pipes, and any damp area around tubs and sinks, so mold spores don’t have a growing environment;
* Rebuild, or retrofit, with water-resistant building materials such as tile, stone, deep-sealed concrete, galvanized or stainless steel hardware, indoor/outdoor carpeting, waterproof wallboard, water resistant glues and so on;
* Prevent seepage of water from outdoors into your house. It’s important to have rainwater from gutters or the roof drain away from the house. Ground around the house needs to slope away to keep basement and crawl space dry;
* Cover dirt in crawl spaces with plastic to prevent moisture from coming from the ground. Ventilate the area as much as possible.

Keep it clean

* Clean fabrics, such as curtains and upholstery, often and keep them dry, because soil promotes mold growth;
* Store clean fabric items in well-ventilated areas;
* Consider having air ducts cleaned professionally if you suspect mold exists on the inside surface of the duct or if duct insulation has been wet.

Keep it dry

* Reduce the moisture in the air with dehumidifiers, fans and open windows or air conditioners, especially in hot weather;
* Do NOT use fans if mold may already exist; a fan will spread the mold spores;
* Try to keep the humidity in your home below 40 per cent;
* In moisture-prone areas, choose carpets of man-made fibers
Reduce potential for condensation on cold surfaces by insulating

Disinfect it

* Routinely check potential problem spots like the basement, bathroom and laundry for moldy odors;
* Disinfect often with a 10 per cent solution of bleach – follow bleach bottle directions;

Additional information on mold and mold cleanup can be found on these Web sites: The Centers for Disease Control provides a comprehensive description of how to clean and disinfect a mold-damaged home on its environmental health Web page. For more information, connect to www.bt.cdc.gov/disasters/floods/after/asp.

For a printable brochure on mold prevention and cleanup, visit FEMA’s Preparation and Prevention Web page at www.fema.gov/library/prepandprev.shtm.